What operations are required before the new diesel generator set is used

Under normal circumstances, the power generation diesel generator set does not contain consumables when it leaves the factory, so the customer should confirm that the consumables are enough to be added to the appropriate position before using it. If you are not clear about the specific operation, you can contact the diesel generator set factory, and the after-sales service personnel of the manufacturer will provide technical support for everyone. Note under sub-item here:

1. Filling the fuel system

Fill the fuel filter with clean diesel oil. The diesel oil specifications should meet national standards and local environmental needs; check the tightness of the oil inlet pipeline; check and fill the fuel tank.

2. Filling lubrication system

Remove the oil inlet pipe from the turbocharger, lubricate the turbocharger bearing with 50~60 ml of clean lubricating oil, and then replace the oil inlet pipe; fill the oil to between the low (L) and high (H) positions on the oil dipstick.

Equipped with the oil dipstick.

3. Check air line connection

Check the air compressor, air equipment (if equipped) and the air intake and exhaust system for tightness. Tighten all clamps and joints.

4. Check and add coolant

Remove the radiator or heat exchanger cover and check the engine coolant level. If necessary, add it; check the leakage of coolant.

At this point, the oil, antifreeze and fuel are added, and the test machine can be carried out. Some customer operators use diesel generator sets all the year round and have rich experience, so it is not a problem to start up naturally. Some customers use diesel generator sets for the first time, please contact the manufacturer to assist or guide the operation. We will wholeheartedly provide relevant services for you.

Recommended News

Internal combustion engine noise is a complex noise composed of multiple sound sources. According to the nature of the noise, it can be divided into aerodynamic noise, mechanical noise, and combustion noise.

A generator is a mechanical device that converts other forms of energy into electrical energy. It is driven by a water turbine, steam turbine, diesel engine or other power machinery. It converts the energy generated by water flow, air flow, fuel combustion or nuclear fission into mechanical energy and transmits it to the generator. The generator is converted into electrical energy.

During the operation of the gasoline engine, various failures will occur due to the natural wear of the parts and improper use and maintenance. The fuel supply system and the ignition system often fail. Sometimes the two systems fail at the same time, and more complicated failures will occur, which brings certain difficulties to troubleshooting.

The fuel consumption of gasoline generators is high, and a large amount of oil escapes to the combustion chamber, which will increase the accumulation of spark plug combustion chambers, cylinder liners, etc., causing the pistons and piston rings to glue, seize, and fail to work. At the same time, due to the carbon deposits in the piston group, the main parts such as the cylinder liner are worn out, which in turn seriously affects the fuel consumption of the engine, and seriously affects the power and economy of the internal combustion engine. In addition, the burning engine oil makes the engine emit black smoke, pollute the environment, and endanger people's health.

In the case of normal operation of the unit, according to the need for electricity, the power supply circuit is connected to start power supply. Generators are not allowed to leave the unit and chat without authorization, and pay attention to the operation of the unit at any time, and whether the voltage and temperature rise are normal.